Welcome to Docker Desktop!
The
Docker Desktop for Windows section contains information about the Docker Desktop Community Stable release. For information about features available in Edge releases, see the
Edge release notes. For information about Docker Desktop Enterprise (DDE) releases, see
Docker Desktop Enterprise.
Docker is a full development platform to build, run, and share containerized applications. Docker Desktop is the best way to get started with Docker on Windows.
Test your installation
Open a terminal window (Command Prompt or PowerShell, but not PowerShell ISE).
Run docker --version
to ensure that you have a supported version of Docker:
> docker --version
Docker version 19.03.1
-
> docker run hello-world
docker : Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
1b930d010525: Pull complete
Digest: sha256:c3b4ada4687bbaa170745b3e4dd8ac3f194ca95b2d0518b417fb47e5879d9b5f
Status: Downloaded newer image for hello-world:latest
Hello from Docker!
This message shows that your installation appears to be working correctly.
...
List the hello-world
image that was downloaded from Docker Hub:
List the hello-world
container (that exited after displaying “Hello from Docker!”):
> docker container ls --all
Explore the Docker help pages by running some help commands:
> docker --help
> docker container --help
> docker container ls --help
> docker run --help
Explore the application
In this section, we demonstrate the ease and power of Dockerized applications by running something more complex, such as an OS and a webserver.
Pull an image of the
Ubuntu OS and run an interactive terminal inside the spawned container:
> docker run --interactive --tty ubuntu bash
docker : Unable to find image 'ubuntu:latest' locally
latest: Pulling from library/ubuntu
22e816666fd6: Pull complete
079b6d2a1e53: Pull complete
11048ebae908: Pull complete
c58094023a2e: Pull complete
Digest: sha256:a7b8b7b33e44b123d7f997bd4d3d0a59fafc63e203d17efedf09ff3f6f516152
Status: Downloaded newer image for ubuntu:latest
Do not use PowerShell ISE
You are in the container. At the root #
prompt, check the hostname
of the container:
root@8aea0acb7423:/# hostname
8aea0acb7423
Notice that the hostname is assigned as the container ID (and is also used in the prompt).
Exit the shell with the exit
command (which also stops the container):
root@8aea0acb7423:/# exit
>
List containers with the --all
option (because no containers are running).
The hello-world
container (randomly named, relaxed_sammet
) stopped after displaying its message. The ubuntu
container (randomly named, laughing_kowalevski
) stopped when you exited the container.
> docker container ls --all
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
8aea0acb7423 ubuntu "bash" 2 minutes ago Exited (0) 2 minutes ago laughing_kowalevski
45f77eb48e78 hello-world "/hello" 3 minutes ago Exited (0) 3 minutes ago relaxed_sammet
Pull and run a Dockerized
nginx web server that we name,
webserver
:
> docker run --detach --publish 80:80 --name webserver nginx
Unable to find image 'nginx:latest' locally
latest: Pulling from library/nginx
fdd5d7827f33: Pull complete
a3ed95caeb02: Pull complete
716f7a5f3082: Pull complete
7b10f03a0309: Pull complete
Digest: sha256:f6a001272d5d324c4c9f3f183e1b69e9e0ff12debeb7a092730d638c33e0de3e
Status: Downloaded newer image for nginx:latest
dfe13c68b3b86f01951af617df02be4897184cbf7a8b4d5caf1c3c5bd3fc267f
Point your web browser at http://localhost
to display the nginx start page. (You don’t need to append :80
because you specified the default HTTP port in the docker
command.)
List only your running containers:
> docker container ls
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
0e788d8e4dfd nginx "nginx -g 'daemon of…" 2 minutes ago Up 2 minutes 0.0.0.0:80->80/tcp webserver
Stop the running nginx container by the name we assigned it, webserver
:
> docker container stop webserver
Remove all three containers by their names -- the latter two names will differ for you:
> docker container rm webserver laughing_kowalevski relaxed_sammet
Docker Settings dialog
The Docker Desktop menu allows you to configure your Docker settings such as installation, updates, version channels, Docker Hub login, and more.
This section explains the configuration options accessible from the Settings dialog.
Open the Docker Desktop menu by clicking the Docker icon in the Notifications area (or System tray):
Select Settings to open the Settings dialog:
General
On the General tab of the Settings dialog, you can configure when to start and update Docker.

Start Docker when you log in - Automatically start Docker Desktop upon Windows system login.
Automatically check for updates - By default, Docker Desktop automatically checks for updates and notifies you when an update is available. Click OK to accept and install updates (or cancel to keep the current version). You can manually update by choosing Check for Updates from the main Docker menu.
Expose daemon on tcp://localhost:2375 without TLS - Click this option to enable legacy clients to connect to the Docker daemon. You must use this option with caution as exposing the daemon without TLS can result in remote code execution attacks.
Send usage statistics - By default, Docker Desktop sends diagnostics, crash reports, and usage data. This information helps Docker improve and troubleshoot the application. Clear the check box to opt out. Docker may periodically prompt you for more information.
Click Switch to the Edge version to learn more about Docker Desktop Edge releases.
Resources
The Resources tab allows you to configure CPU, memory, disk, proxies, network, and other resources.
ADVANCED
Use the Advanced tab to limit resources available to Docker.
CPUs: By default, Docker Desktop is set to use half the number of processors available on the host machine. To increase processing power, set this to a higher number; to decrease, lower the number.
Memory: By default, Docker Desktop is set to use 2
GB runtime memory, allocated from the total available memory on your machine. To increase the RAM, set this to a higher number. To decrease it, lower the number.
Swap: Configure swap file size as needed. The default is 1 GB.
Disk image size: Specify the size of the disk image.
Disk image location: Specify the location of the Linux volume where containers and images are stored.
You can also move the disk image to a different location. If you attempt to move a disk image to a location that already has one, you get a prompt asking if you want to use the existing image or replace it.
FILE SHARING
Use File sharing to allow local drives on Windows to be shared with Linux containers. This is especially useful for editing source code in an IDE on the host while running and testing the code in a container. Note that configuring file sharing is not necessary for Windows containers, only
Linux containers. If a drive is not shared with a Linux container you may get
file not found
or
cannot start service
errors at runtime. See
Volume mounting requires shared drives for Linux containers.
Apply & Restart makes the drives available to containers using Docker’s bind mount (-v
) feature.
Tips on shared drives, permissions, and volume mounts
Shared drives are designed to allow application code to be edited on the host while being executed in containers. For non-code items such as cache directories or databases, the performance will be much better if they are stored in the Linux VM, using a
data volume (named volume) or
data container.
-
Windows presents a case-insensitive view of the filesystem to applications while Linux is case-sensitive. On Linux it is possible to create 2 separate files: test
and Test
, while on Windows these filenames would actually refer to the same underlying file. This can lead to problems where an app works correctly on a developer Windows machine (where the file contents are shared) but fails when run in Linux in production (where the file contents are distinct). To avoid this, Docker Desktop insists that all shared files are accessed as their original case. Therefore if a file is created called test
, it must be opened as test
. Attempts to open Test
will fail with “No such file or directory”. Similarly once a file called test
is created, attempts to create a second file called Test
will fail.
SHARED DRIVES ON DEMAND
You can share a drive “on demand” the first time a particular mount is requested.
If you run a Docker command from a shell with a volume mount (as shown in the example below) or kick off a Compose file that includes volume mounts, you get a popup asking if you want to share the specified drive.
You can select to
Share it, in which case it is added your Docker Desktop
Shared Drives list and available to containers. Alternatively, you can opt not to share it by selecting
Cancel.
PROXIES
Docker Desktop lets you configure HTTP/HTTPS Proxy Settings and automatically propagates these to Docker and to your containers. For example, if you set your proxy settings to http://proxy.example.com
, Docker uses this proxy when pulling containers.
When you start a container, your proxy settings propagate into the containers. For example:
> docker run alpine env
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
HOSTNAME=b7edf988b2b5
TERM=xterm
HOME=/root
HTTP_PROXY=http://proxy.example.com:3128
http_proxy=http://proxy.example.com:3128
no_proxy=*.local, 169.254/16
In the output above, the
HTTP_PROXY
,
http_proxy
, and
no_proxy
environment variables are set. When your proxy configuration changes, Docker restarts automatically to pick up the new settings. If you have containers that you wish to keep running across restarts, you should consider using
restart policies.
NETWORK
You can configure Docker Desktop networking to work on a virtual private network (VPN). Specify a network address translation (NAT) prefix and subnet mask to enable Internet connectivity.
DNS Server: You can configure the DNS server to use dynamic or static IP addressing.
Note: Some users reported problems connecting to Docker Hub on Docker Desktop Stable version. This would manifest as an error when trying to run
docker
commands that pull images from Docker Hub that are not already downloaded, such as a first time run of
docker run hello-world
. If you encounter this, reset the DNS server to use the Google DNS fixed address:
8.8.8.8
. For more information, see
Networking issues in Troubleshooting.
Updating these settings requires a reconfiguration and reboot of the Linux VM.
Docker Engine
The Docker Engine page allows you to configure the Docker daemon to determine how your containers run.
Type a JSON configuration file in the box to configure the daemon settings. For a full list of options, see the Docker Engine
dockerd commandline reference.
Click Apply & Restart to save your settings and restart Docker Desktop.
Command Line
On the Command Line page, you can specify whether or not to enable experimental features.
On both Docker Desktop Edge and Stable releases, you can toggle the experimental features on and off. If you toggle the experimental features off, Docker Desktop uses the current generally available release of Docker Engine.
EXPERIMENTAL FEATURES
Experimental features provide early access to future product functionality. These features are intended for testing and feedback only as they may change between releases without warning or can be removed entirely from a future release. Experimental features must not be used in production environments. Docker does not offer support for experimental features.
To enable experimental features in the Docker CLI, edit the config.json
file and set experimental
to enabled.
To enable experimental features from the Docker Desktop menu, click Settings (Preferences on macOS) > Command Line and then turn on the Enable experimental features toggle. Click Apply & Restart.
Run docker version
to verify whether you have enabled experimental features. Experimental mode is listed under Server
data. If Experimental
is true
, then Docker is running in experimental mode, as shown here:
> docker version
Client: Docker Engine - Community
Version: 19.03.1
API version: 1.40
Go version: go1.12.5
Git commit: 74b1e89
Built: Thu Jul 25 21:17:08 2019
OS/Arch: windows/amd64
Experimental: true
Server: Docker Engine - Community
Engine:
Version: 19.03.1
API version: 1.40 (minimum version 1.12)
Go version: go1.12.5
Git commit: 74b1e89
Built: Thu Jul 25 21:17:52 2019
OS/Arch: linux/amd64
Experimental: true
containerd:
Version: v1.2.6
GitCommit: 894b81a4b802e4eb2a91d1ce216b8817763c29fb
runc:
Version: 1.0.0-rc8
GitCommit: 425e105d5a03fabd737a126ad93d62a9eeede87f
docker-init:
Version: 0.18.0
GitCommit: fec3683
Kubernetes
Docker Desktop includes a standalone Kubernetes server that runs on your Windows host, so that you can test deploying your Docker workloads on Kubernetes.
The Kubernetes client command, kubectl
, is included and configured to connect to the local Kubernetes server. If you have kubectl
already installed and pointing to some other environment, such as minikube
or a GKE cluster, be sure to change context so that kubectl
is pointing to docker-desktop
:
> kubectl config get-contexts
> kubectl config use-context docker-desktop
To enable Kubernetes support and install a standalone instance of Kubernetes running as a Docker container, select Enable Kubernetes.
To set Kubernetes as the
default orchestrator, select
Deploy Docker Stacks to Kubernetes by default.
By default, Kubernetes containers are hidden from commands like docker service ls
, because managing them manually is not supported. To make them visible, select Show system containers (advanced). Most users do not need this option.
Click Apply & Restart to save the settings. This instantiates images required to run the Kubernetes server as containers, and installs the kubectl.exe
command in the path.
When Kubernetes is enabled and running, an additional status bar item displays at the bottom right of the Docker Desktop Settings dialog. The status of Kubernetes shows in the Docker menu and the context points to docker-desktop
.
To disable Kubernetes support at any time, clear the Enable Kubernetes check box. The Kubernetes containers are stopped and removed, and the /usr/local/bin/kubectl
command is removed.
To delete all stacks and Kubernetes resources, select Reset Kubernetes Cluster.
If you installed kubectl
by another method, and experience conflicts, remove it.
For more information on using the Kubernetes integration with Docker Desktop, see
Deploy on Kubernetes.
Reset
The
Restart Docker Desktop and
Reset to factory defaults options are now available on the
Troubleshoot menu. For information, see
Logs and Troubleshooting.
Troubleshoot
Switch between Windows and Linux containers
From the Docker Desktop menu, you can toggle which daemon (Linux or Windows) the Docker CLI talks to. Select Switch to Windows containers to use Windows containers, or select Switch to Linux containers to use Linux containers (the default).
For more information on Windows containers, refer to the following documentation:
Settings dialog changes with Windows containers
When you switch to Windows containers, the Settings dialog only shows those tabs that are active and apply to your Windows containers:
If you set proxies or daemon configuration in Windows containers mode, these apply only on Windows containers. If you switch back to Linux containers, proxies and daemon configurations return to what you had set for Linux containers. Your Windows container settings are retained and become available again when you switch back.
Dashboard
The Docker Desktop Dashboard enables you to interact with containers and applications and manage the lifecycle of your applications directly from your machine. The Dashboard UI shows all running, stopped, and started containers with their state. It provides an intuitive interface to perform common actions to inspect and manage containers and Docker Compose applications. For more information, see
Docker Desktop Dashboard.
Docker Hub
Select
Sign in /Create Docker ID from the Docker Desktop menu to access your
Docker Hub account. Once logged in, you can access your Docker Hub repositories directly from the Docker Desktop menu.
Two-factor authentication
Docker Desktop enables you to sign into Docker Hub using two-factor authentication. Two-factor authentication provides an extra layer of security when accessing your Docker Hub account.
After you have enabled two-factor authentication:
Go to the Docker Desktop menu and then select Sign in / Create Docker ID.
Enter your Docker ID and password and click Sign in.
After you have successfully signed in, Docker Desktop prompts you to enter the authentication code. Enter the six-digit code from your phone and then click Verify.
After you have successfully authenticated, you can access your organizations and repositories directly from the Docker Desktop menu.
Adding TLS certificates
How do I add custom CA certificates?
Docker Desktop supports all trusted Certificate Authorities (CAs) (root or intermediate). Docker recognizes certs stored under Trust Root Certification Authorities or Intermediate Certification Authorities.
Docker Desktop creates a certificate bundle of all user-trusted CAs based on the Windows certificate store, and appends it to Moby trusted certificates. Therefore, if an enterprise SSL certificate is trusted by the user on the host, it is trusted by Docker Desktop.
How do I add client certificates?
You can add your client certificates in ~/.docker/certs.d/<MyRegistry>:<Port>/client.cert
and ~/.docker/certs.d/<MyRegistry>:<Port>/client.key
. You do not need to push your certificates with git
commands.
When the Docker Desktop application starts, it copies the ~/.docker/certs.d
folder on your Windows system to the /etc/docker/certs.d
directory on Moby (the Docker Desktop virtual machine running on Hyper-V).
You need to restart Docker Desktop after making any changes to the keychain or to the ~/.docker/certs.d
directory in order for the changes to take effect.
The registry cannot be listed as an
insecure registry (see
Docker Daemon). Docker Desktop ignores certificates listed under insecure registries, and does not send client certificates. Commands like
docker run
that attempt to pull from the registry produce error messages on the command line, as well as on the registry.